Screen Setup Driver Selectable Items - Jeep Grand Cherokee 2014 Owner's Manual

312 UNDERSTANDING YOUR INSTRUMENT PANEL
6. Release the brake pedal.
Pressing the launch control button when launch control is
active will deactivate launch control.
NOTE:
• Launch Mode brings the engine to optimum RPM and
waits for the driver to release the brake. Launch Mode
then uses engine throttle only to achieve controlled
wheelslip for maximum acceleration through first
gear.
• Launch Mode can be initiated in any of the Select Trac
Modes.
• Launch Mode is not available until the 500 mile
break-in has been achieved.
Screen Setup
Press and release the UP or DOWN arrow
button until the Screen Setup display icon is
highlighted in the EVIC. Press and release the
RIGHT arrow button to enter the Screen Setup
sub-menu. The Screen Setup feature allows you to change
what information is displayed in the instrument cluster
as well as the location that information is displayed.

Screen Setup Driver Selectable Items

Odometer
• 000
• 000.0
Upper Left
• None
• Compass