Table of Contents
Advertisement
Computer operation
Connection can be made with wired LAN. However, confirm to your system administrator on network settings
before changing any settings.
1 )
Turn on the computer.
2 )
Make the network setting according to your system administrator.
If the projector settings are the default settings (
network settings.
DHCP
IP address
Subnet mask
Default gateway
DNS1/DNS2
Accessing from the Web browser
1 )
Activate the Web browser in the personal computer.
2 )
Enter the IP address set by the projector into the URL input field of the Web browser.
3 )
Enter your
"User name" and "Password".
The factory default settings are user1 (user privileges)
z
or admin1 (administrator privileges) for the user name
and panasonic (lowercase letters) for the password.
4 )
Click [OK] to display the Projector
status page.
"Projector status" page is displayed.
z
Note
Avoid activating two or more Web browser simultaneously to work out setting or control actions.
z
Change the password first of all.
z
Administrator privileges enable the use of all functions. User privileges enable the use of only "Projector status",
z
"Network status", "Basic control", "Advanced control" and "Change password".
If you want to control the projector using a Web browser, set [Network control] in the network menu to [On].
z
There are some control items used with the JavaScript function in the setting pages. If the web browser is set
z
not to use this JavaScript function, it may not control the projector properly.
page 63), the computer can be used with the following
Æ
Off
192.168.10.101
255.255.255.0
192.168.10.1
NONE
Network
67
ENGLISH -
Advertisement
Chapters
Table of Contents
