Network; Digital Link Mode; Digital Link Setup; Digital Link Status - Panasonic PT-VW431DU Operating Instructions Manual

Network

Select [Network] from the Main Menu (see
"Navigating through the menu" on page 37),
then select the item from the sub-menu.
Remote Control

DIGITAL LINK mode

You can switch the DIGITAL LINK function mode
among Auto, DIGITAL LINK and Ethernet.
1 ) Press ▲ ▼ to select [DIGITAL LINK
mode].
2 ) Press <ENTER> button and press ▲ ▼
to select items.

Auto

DIGITAL LINK
Ethernet
Communication availability of all settings
Settings
Image, Sound
Auto
DIGITAL LINK
Ethernet
Note
To carry out Ethernet communication with optional
z
accessory Digital interface box (ET-YFB100G), please
set to [Auto] or [DIGITAL LINK].
If set to [Ethernet], communication can not be carried
z
out with ET-YFB100G because the [LAN/DIGITAL LINK]
terminal is only for NETWORK communication.

DIGITAL LINK setup

You can make detailed DIGITAL LINK settings among
Duplex (Ethernet), Duplex (DIGITAL LINK) and Store.
1 ) Press ▲ ▼ to select [DIGITAL LINK
setup].
62
- ENGLISH
Control Panel
To select the automatically
response communication
method.
To select the DIGITAL LINK.
To select the Ethernet.
Communication availability
Ethernet RS-232C
  
  
  
2 ) Press <ENTER> button or the ► button
to access to the submenu.
Duplex (Ethernet)
J
Set the method of communication of the computer or
hub.
1 ) Press ▲ ▼ to select [Duplex (Ethernet)]
and press <ENTER> button.
2 ) Press ▲ ▼ to switch the settings.
Communication method will
Autonegotiation
be set automatically.
Full Duplex communication
100 Base TX-Full
method will be set.
Half Duplex communication
100 Base TX-Half
method will be set.
Duplex (DIGITAL LINK)
J
Set the communication method between the Twisted
pair cable Extender and the computer or the Hub.
1 ) Press ▲ ▼ to select [Duplex (DIGITAL
LINK)] and press <ENTER> button.
2 ) Press ▲ ▼ to switch the settings.
Communication method will
Autonegotiation
be set automatically.
Full Duplex communication
100 Base TX-Full
method will be set.
Half Duplex communication
100 Base TX-Half
method will be set.
Store
J
Store the settings.
1 ) Press ▲ ▼ to select [Store].
2 ) Press <ENTER> button.
A confirmation box appears and then select
z
[Yes].

DIGITAL LINK status

You can check detailed setting information of DIGITAL
LINK.
1 ) Press ▲ ▼ to select [DIGITAL LINK
status].
2 ) Press <ENTER> button to display the
Mode, the HDMI Status and the Signal
quality information.
Link state, HDMI status and signal quality are
z
displayed.