Manual PC adjust
Select [PC adjust] from the Main Menu (see
"Navigating through the menu" on page 37),
then select the item from the sub-menu.
Remote Control
Some computers employ special signal formats
which may not be tuned by Multi-scan system of this
projector. Manual PC adjustment enables you to
precisely adjust several parameters to match those
signal formats. The projector has 10 independent
memory areas to store those parameters manually
adjusted. It allows you to recall the setting for a
specific computer.
Fine sync
Adjusts the projector when there is flicker due to a
tracking (synchronization) mismatch.
1 )
Press ▲▼ to select [Fine sync].
2 )
Press the <ENTER> button to display
the adjustment dialog box.
3 )
Press ◄► to adjust the value.
The value can be adjusted from 0 to 31.
z
Total dots
Adjusts total number of dots in the horizontal interval.
1 )
Press ▲▼ to select [Total dots].
2 )
Press the <ENTER> button to display
the adjustment dialog box.
3 )
Press ◄► to adjust the value.
Control Panel
Manual PC adjust
Horizontal
1 )
Press ▲▼ to select [Horizontal].
2 )
Press the <ENTER> button to display
the adjustment dialog box.
3 )
Press ◄► to adjust the horizontal
picture position.
For horizontal (right and left)
J
adjustment
Operation
The picture
position
Press ◄.
moves to the
right.
The picture
position
Press ►.
moves to the
left.
Vertical
1 )
Press ▲▼ to select [Vertical].
2 )
Press the <ENTER> button to display
the adjustment dialog box.
3 )
Press ◄► to adjust the vertical picture
position.
For vertical (up and down)
J
adjustment
Operation
The picture
►
Press
.
position
moves up.
The picture
◄
Press
.
position
moves down.
Adjustment
Adjustment
ENGLISH -
43