Installing A System Including Two Transmitters And An Audio Device - Sennheiser EMP 2015 Instruction Manual

Adapting the system sensitvity to the connected receivers
µ
Installing a system including two transmitters and an
audio device
You can also connect an additional receiver and an external audio device
(e.g. VCR) to the two line inputs (LINE IN)
such a system, the signals of two speakers speaking simultaneously and the
signals of a VCR or similar are then reproduced by loudspeakers in the
room. (In addition, you can connect sound recording devices to the two line
outputs (LINE OUT)
To install this system, please proceed as described in the chapters "Installing
a system with several transmitters (team teaching)" and "Connecting external
audio devices".
Turn the line input sensitivity control (LINE IN)
possible.
Adjust the output level on the EM 500 receiver as described in the
receiver's instruction manual.
of this system.)
µ
clockwise as far as
of the EMP 2015. With
57