Table of Contents
Advertisement
Problem
Dropouts
Speaker's voice overlaid
with background noise
Sound is not clear / rough
68
Possible cause
Antenna sensitivity is not sufficient
Transmitting antenna is not connected
Connection of transmitting antenna
has worked loose
Transmission frequency is not the
same as the receiving frequency
Several transmitters in the same
room or in neighboring rooms
Microphone is covered or
positioned too far from the mouth
Transmission frequency is not the
same as the receiving frequency
If problems occur that are not listed in the above table, please contact
your local Sennheiser agent for assistance.
What to do
Use a remote or telescopic
antenna
Connect the antenna
Screw the antenna tight
Set the transmitter and the
receiver section to the same
frequency
(u "Special adjustments")
Check the frequency settings
(u "Special adjustments")
Position the microphone at
the corner of the mouth
Set the transmitter and the
receiver section to the same
frequency
(u "Special adjustments")
Advertisement
Table of Contents
