Table of Contents
Advertisement
IMPORTANT SAFETY INSTRUCTIONS
Heed Warnings
Adhere to all warnings on the product and in the operating
instructions.
Read, Retain, and Follow
These Instructions
Read all of the instructions before you operate this
product. Follow all operating instructions that accompany
this product. Retain the instructions for future use. Give
particular attention to all safety precautions.
Comply With Warnings
Avoid electric shock. Comply with all warnings and cautions
in the operating instructions, as well as those that are
affi xed to this product.
Power Warnings
Providing a Power Source
A label on this product indicates the correct power source
for this product. Operate this product only from an electrical
outlet with the voltage and frequency indicated on the
product label.
If you are uncertain of the type of power supply to your
home or business, consult your cable service provider or
your local power company.
Grounding This Product (U.S.A. and
Canada Only)
WARNING: To avoid electric shock
and fi re hazard, match the plug and outlet
connections carefully, then fully insert. If the
plug and outlet do not match, or you cannot
fully insert the plug, contact an electrician to
update your power outlets.
If this product is equipped with either a three-prong
(grounding pin) safety plug or a two-prong (polarized)
safety plug, follow these safety guidelines to properly
ground this product.
• For a 3-prong plug (one prong on this plug is a protective
grounding pin), insert the plug into a grounded mains,
3 -prong outlet.
Note: This plug fi ts only one way. If you are unable
to insert this plug fully into the outlet, contact your
electrician to replace your obsolete outlet.
• For a 2-prong plug (a polarized plug with one wide blade
and one narrow blade), insert the plug into a polarized mains,
2-prong outlet in which one socket is wider than the other.
Note: If you are unable to insert this plug fully into the
outlet, try reversing the plug. If the plug still fails to fi t,
contact an electrician to replace your obsolete outlet.
Overloading
WARNING: Avoid electric shock
and fi re hazard! Do not overload mains AC
outlets and extension cords. For products
that require battery power or other power
sources to operate them, refer to the
operating instructions for those products.
Do not overload electrical outlets, extension cords, or
integral convenience receptacles as this can result in a risk
of fi re or electric shock. For products that require battery
power or other sources to operate, refer to the operating
instructions for that product.
iv
Preventing Power Cord Damage
Arrange all power cords so that people or pets cannot walk
on the cords. Do not place objects on the cords. Do not
lean objects against the cords. Placing objects on or leaning
objects against cords can damage the cords. Give particular
attention to cords at the point at which the cord connects
to plugs, at the electrical outlets, and where the cords exit
the product.
Usage Warnings
Providing Ventilation
This product has openings for ventilation that protect it from
overheating. To ensure the reliability of this product, do the
following:
• Do not block or cover these openings.
• Do not place entertainment devices (such as VCRs or
DVDs), lamps, books, vases with liquids, or other objects
on top of this product.
• Do not place this product in any of the following locations:
- On a bed, sofa, rug, or similar surface
- Near heat sources such as radiators, heat registers,
stoves, or other products (including amplifi ers) that
produce heat
- In an enclosure, such as a bookcase or rack, unless
the installation provides proper ventilation
Selecting a Proper Location
WARNING: Avoid personal injury and
damage to this product! An unstable surface
may cause this product to fall.
Place this product in a location that is close enough to
an electrical outlet and where the power cord is easily
accessible to be disconnected from the wall outlet or from
the rear panel of the product.
Important: The power cord is the mains power supply
disconnect device.
Place this product on a stable surface. The surface must
support the size and weight of this product.
Operating Environment
This product is designed for operation indoors
with a temperature range from 32° to 104°
F (0° to 40°C). Each product should have
adequate spacing on all sides so that the
cooling air vents on the chassis are not blocked.
Cleaning This Product
WARNING: Avoid electric shock! Un-
plug this product before cleaning.
Before cleaning this product, unplug it from the electrical
outlet. Use a damp cloth to clean this product. Do not use a
liquid cleaner or an aerosol cleaner. Do not use a magnetic/
static cleaning device (dust remover) to clean this product.
Advertisement
Table of Contents
