Compliance Information - Cisco Explorer 8240HD User Manual

Compliance Information

United States FCC Compliance
This equipment has been tested and found to comply
with the applicable limits of Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may
cause harmful interference to radio or TV reception,
which can be determined by turning the equipment
off and on. The user is encouraged to try to correct
the interference by one or more of the following
measures:
• Increase the separation between the equipment
and receiver
• Connect the equipment into an outlet on a
circuit diff erent from that to which the receiver is
connected
• Consult your cable company or an experienced
radio/TV technician for help
Any changes or modifi cations not expressly approved
by Cisco Systems, Inc., could void the user's authority
to operate the equipment.
Important: The information shown in the FCC
Declaration of Conformity paragraph below is a
requirement of the FCC and is intended to supply
you with information regarding the FCC approval of
this device. The phone numbers listed are for FCC-
related questions only and not intended for questions
regarding the connection or operation for this device.
Please contact your cable service provider for any
questions you may have regarding the operation or
installation of this device.
FCC Declaration of Conformity
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) this device may not cause harmful interference,
and 2) this device must accept any interference
received, including interference that may cause
undesired operation.
®
Explorer 8240HD
Digital Video Recorder
Model 8240HD
Manufactured by: Cisco Systems, Inc.
5030 Sugarloaf Parkway
Lawrenceville, Georgia 30044; USA
Telephone 678 277-1120
Canada EMI Regulation
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la class B est conforme à
la norme NMB-003 du Canada.
Software and Firmware Use
The software described in this document is protected
by copyright law and furnished to you under a license
agreement. You may only use or copy this software
in accordance with the terms of your license
agreement.
The fi rmware in this equipment is protected by
copyright law. You may only use the fi rmware in the
equipment in which it is provided. Any reproduction
or distribution of this fi rmware, or any portion of it,
without our express written consent is prohibited.
Disclaimer
Cisco Systems, Inc. assumes no responsibility for
errors or omissions that may appear in this guide.
Cisco reserves the right to change this guide at any
time without notice.
20081121 FCC Standard
19