Restore Default; Update Firmware; Logout - KTI Networks KGS-810F User Manual

your current http connection lost. You must rebuild the connection to perform any management operation to
the unit.

4.19 Restore Default

This menu is used to restore all settings of the switch unit with factory default values except current IP
configuration and Management VLAN configuration.

4.20 Update Firmware

This menu is used to perform in-band firmware (switch software) upgrade. Enter the path and file name of new
firmware image file for uploading.
Configuration Description
Filename Path and filename (warp format)
[Browse] Click to browse your computer file system for the firmware image file
[Upload] Click to start upload

4.21 Logout

This menu is used to perform a logout from the switch management. If current user does not perform any
management operation over 3 minutes, the switch will execute an auto logout and abort the current connection.
-64-