Mode Operation:
1. The joint port is the shared member port for all groups.
2. Two member ports are configured in each group.
3. The member ports in same group can communicate with other only.
4. No packet tag is examined.
5. A received packet will not be modified (i.e. tagging or untagging) through VLAN operation till it is
transmitted.
4.6.3 Advanced VLAN Mode
Configuration
Ingress Default Tag
Ingress Settings
Egress Settings
VLAN Groups
Description
Click to configure per port Ingress Default Tag settings
Click to configure per port ingress settings
Click to configure per port egress settings
Click to configure VLAN group table
-38-