Setting A Delay Start; Rinse Air And Salt Indicator Neons - Baumatic BDI681 Instruction Manual

Setting a delay start

It is possible to delay the start of the wash program for up to a
maximum of 24 hours.
o Check whether the appliance needs rinse aid or salt adding to it.
o Pull out the top and bottom baskets, then load them in
accordance with the loading instructions.
o Push the top and bottom baskets fully back into position.
o Add detergent
o Turn the appliance on by using the ON/OFF button.
o IMPORTANT: Wait for 5 seconds before pressing the
program selection button, otherwise the appliance may
not function correctly.
o Press the program selection button to choose an appropriate
wash program for the load that you are washing. The relevant
program indicator neon will light to show which wash program
you have selected.
o Press the delay start button and you will see the amount of time
that you are delaying the wash program by, appear in the LED
display.
o Close the door firmly, so that you hear the door lock click shut.
o Once the period of time that you set has passed, the dishwasher
will start the wash program that you selected.
Rinse aid and salt indicator neons
o The neon indicates that you need to add rinse aid to the
appliance. You should follow the procedure outlined on page 13.
o The neon indicates that you need to add dishwasher salt to
the appliance. You should follow the procedure outlined on page
11.
o The rinse aid and salt indicator neons on the
control panel will let you know when the
appliance needs rinse aid or salt adding to it.
24