Specifications - Dual XIA2340 Installation & Owner's Manual

XIA SERIES

Specifications

XIA2340
10
OPERATION
CEA-2006 Power Standard Specifications
70 Watts RMS x 2 channels at 4 ohms and < 1% THD+N
Power Output:
Signal to noise ratio:
Additional power output:
90 Watts RMS x 2 channels at 2 ohms and < 1% THD+N
200 Watts RMS x 1 channel at 4 ohms (bridged) and < 1% THD+N
Dynamic power: 340 Watts at 4 ohms
Frequency response:
Maximum input signal:
Minimum input signal:
Speaker output impedance:
illuminite output voltage:
illuminite output current:
Low level input range:
High level input range:
0~12dB @ 45Hz
Bass boost:
Crossover range: 40~400Hz
12dB/octave
Crossover slope:
11-16 VDC, negative ground
Power supply:
Fuses: 30 amp, 2 amp ATO
Amplifier dimensions:
Typical installation dimensions:
(reference: 14.4VDC, 20Hz~20kHz)
70dBA (reference: 1 watt into 4 ohms)
20Hz~20kHz (-3dB)
6V
200mV
2~8 ohms (stereo), 4~8 ohms (bridged)
12VDC
2 amp
200mV~6V (10k ohms)
2V~10V (100 ohms)
12.6" x 2.56" x 11.14" (WxHxD)
(320 x 65 x 283 mm)
15" x 3.5" x 11.14" (WxHxD)
(381 x 89 x 283 mm)