Specifications
put
35 Watts RMS x 2 channels @ 4 ohms and
50 Watts RMS x 2 channels @ 2 ohms and
100 Watts RMS x 1 channel @ 4 ohms (bridged) and
Total dynamic power:
Signal to noise ratio:
75dBA (reference: 1 watt into 4 ohms)
Frequency response:
Amplifier dimensions:
Typical installation dimensions:
(reference: 14.4VDC, 20Hz~20kHz)
250 Watts @ 4 ohms
20Hz ~ 20kHz (+/-3dB)
8.27"(L) x 7.09"(W) x 1.97"(D)
10"(L) x 10"(W) x 3"(D)
DPA250
OPERATION
1% THD+N
1% THD+N
1% THD+N