Output Connections - Dual XIA2340 Installation & Owner's Manual

XIA SERIES
The illuminite lighting elements of DUAL XiN series speakers provide you with a unique
custom touch to your vehicle. Dual's patent pending illuminite bulb system and control
circuitry provides an extraordinary Blue-Hue illumination which allows great creative
opportunities for the beginner and seasoned custom installer alike. DUAL XIA-series
amplifiers provide a dedicated switched 12VDC output including independent fused
protection (2 amp) specifically for use with illuminite speakers.
DUAL illumnite speakers have two distinct sets of input terminals. The first is labeled
audio input terminals and the second is labeled illuminite lighting inputs. The inputs are
clearly marked with a label positioned directly above the terminal housing. The polarity (+
and -) indicators for each set of inputs also appear on these labels.
1. Do not connect the amplifier speaker outputs or any audio source to the illuminite
lighting inputs. Connecting the illuminite circuitry to more then 3VAC rms can cause
permanent damage to the lighting elements.
2. Refer to the figures below for making the connections. Make sure to observe polarity
as the illuminite circuitry will not operate when connected reverse polarity. Connect either
red wire from the XIA amplifier to the positive (+) illuminite input terminal and connect
either black wire from the XIA amplifier to the negative (-) illuminite input.
Additional illuminite wiring notes:
Several illuminite speakers can be connected to the 12VDC illuminite output of an XIA
series amplifier. Refer to the table below for the individual illuminite speaker current
requirements. If you are unsure, consult a qualified professional or call DUAL technical
assistance at 1-866-626-7863 for further information.
6
INSTALLATION

Output Connections

OUTPUT CONNECTOR
(Plugs into amplifier)
illuminite current
requirements
(each speaker)
XiN5X253 - 55mA
XiN5X252 - 55mA
XiN6X53 - 55mA
XiN6X52 - 55mA
XiN6X93 - 55mA
XiN6X92 - 55mA
XiNC112 - 55mA
XiNC110 - 55mA
XiNBP210 - 180mA
XiNBP212 - 180mA