Kenwood VR-506 Instruction Manual page 5

Frequency display,
Input display,
PRO LOGIC
indic tor
icator 7
r r-DIGITAL indicator
Preset channel display,
Surround mode display AUTo 'OUND ind
. . . . * . . . . . . . . . . . . . . . . . . . . . . . .
DIRECT indicator
AUTO indicator
MEMO indicator
ST indicator
Speaker indicator
TUNED indicator
I
DOWNMIX indicator
MONITOR indicator
For VR-506/
505/517
Speaker selection indicators
Input channel indicators
Output channel indicators
3 STEREO indicator
STEREO indicator
d &J & & &- & 3 & & 2 For VR-50615171
sstU(m UYE
KRF-V6050D
For VR-505/517/
KRF45050DN5550D
0 POWER key
-L-iQ
(For KRF-V6050DN6050D/V555OD)
Use to turn the main power ON/OFF
0 ON/STANDBY Q/O) key
-m
(For KRF-V6050DN5050DN555OD)
Use to switch the power ON/STANDBY when
the POWER is turned ON
STANDBY indicator
8 POWER (~/a) key
-m
(For VR-506/505/517)
Use to turn the power ON/STANDBY
STANDBY indicator
Q MULTI CONTROL keys
-Qg
Use to control a variety of settings
Q SET UP key
-@g
Use to select the speakers' settings etc
Q Surround indicators
DTS indicator
-Lz!
Lights when the receiver is in the DTS mode.
DOLBY DIGITAL indicator
-m
Lights when the receiver is in the Dolby Digital
mode
DSP MODE indicator
-m
Lights up when the receiver is in DSP mode
0 INPUT MODE key
-El
Use to switch between the digital and analog
inputs
0 DIMMER key
-m-m
Use to adjust the brightness of the display
Use to select the REC MODE
Q MONITOR key
-Da
Use to monitor the source that is connected to
the MONITOR jack
0 VOLUME CONTROL knob
0 PHONES jack
s@
Use for headphone listening
@ SPEAKERS AIB keys
-Lz
(For VR-506/KRF-V6050D)
Use to turn the A/B speakers ON/OFF
@ SPEAKER key
-m
(For VR-505/517/KRF-V5050DN5550D)
Use to turn the speaker ON/OFF
MUTE key
-E!
(For VR-505/517/KRF-V5050DN5550D)
Use to temporarily mute the sound
@ SOUND key
-ml
Use to adjust the sound quality and ambience
effects
@ BAND key
-m
Use to select the broadcast band
@ AUTO/CINEMA EQ key
-@j
Use to select the auto tuning mode
Use to switch the status of CINEMA EQ
@ LISTEN MODE key
-El
Use to select the listening mode
@ MEMORY key
-@j
Usetostoreradiostationsinthepresetmemory
@ SOURCE DIRECT key
-m
Use to pass the source material direct to the
amplifier
0 INPUT SELECTOR knob
-m
Use to select the input sources
0 AV AUX (S VIDEO, V, AUDIO L/R) jacks
(For VR-506/517/KRF-V6050D)
-m
"1x 1 *12-,9* L _ ,.
,, j ,, ,"
Standby mode
When standby indicator is lit, this receiver is in standby mode and consumes a small amount of curent for back-up This system can be switched on using
remote controls