11. ASSEMBLY HINTS
1) Before placing the A-COVER make sure all the four
A-BEZEL GROUND CLIPs are in place.
3) After assembling engine board into the B-COVER,
check the right alignment of the LOCK KEY SWICTH.
5) Tighten the two M1.4 x 5.8 P3642 screws to the
torque of 12 Ncm in the order shown.
19
2) Place the LOCK KEY as shown.
4) Tighten the two M1.2X2, PANHEAD 2.5X0.6 T
PLUS-4IP screws to the torque of 7 Ncm in the order
shown.
6) Tighten this M1.2X2, PANHEAD 2.5X0.6 T PLUS-
4IPscrew to the torque of 7 Ncm.
Confidential Copyright © 2009 NOKIA All rights reserved
Nokia N97 mini
RM-553 / RM-555
Service Manual Level 1&2
Version 1.0
ISSUE 1