Assembly Hints - Nokia RM-515 Service Manual

12.

ASSEMBLY HINTS

1) Make sure the DOME SHEET is glued back in its
correct place on the PWB.
3) Place the ENGINE MODULE in its place with respect
to the snap on the D-COVER.
5) After placing the ENGINE MODULE, tighten the four
Torx+ 4 screws to the torque of 18 Ncm in the order
shown.
18
Nokia 2320 classic / Nokia 2323 classic / Nokia 2330 classic
2) Press the PWB gently in the direction shown to
lock with the snaps of the UI SHIELDING.
4) Then press gently on the lower ends of the
ENGINE MODULE to lock with the two snaps on the D-
COVER.
6) Tighten the remaining Torx+ 4 screw to the
torque of 12 Ncm.
Confidential  Copyright © 2009 NOKIA  All rights reserved
RM-512 / RM-513 / RM-514 / RM-515 / RM-543
Service Manual Level 1&2
Version 2.0 ISSUE 1