Automatic Polarity Detection and Correction
If a receive data pair has the "+" and "-" signals inadvertently
switched, the hubs correct the signal inversion automatically,
allowing the data path to operate correctly.
Straight-Through Wiring
If the twisted-pair link segment is to join two ports and only
one of the ports has an internal crossover, the two pairs of
wires must be straight-through.
Straight-Through RJ-45 Pin Assignments
Pin assignments for Telco connectors are given on the next
page.
End 1
1 (Tx+)
2 (Tx-)
3 (Rx+)
6 (Rx-)
C
End 2
1 (Tx+)
2 (Tx-)
3 (Rx+)
6 (Rx-)
ABLES
57