I
NSTALLING
Rack Mounting
Before rack mounting the hub, pay particular attention to the
following factors:
• Temperature: Since the temperature within a rack assem-
bly may be higher than the ambient room temperature,
check that the rack-environment temperature is within the
operating temperature range specified in Appendix A.
• Mechanical Loading: Do not place any equipment on top
of a rack-mounted unit.
• Circuit Overloading: Be sure that the supply circuit to the
rack assembly is not overloaded.
• Grounding: Rack-mounted equipment should be properly
grounded. Particular attention should be given to supply
connections other than direct connections to the mains.
To rack mount the hub:
1. Remove the two screws from the sides of the unit.
2. Attach the brackets using the screws provided in the Bracket
Mounting Kit.
10
Removing the Screws