Automatic Recording Function (Depending On Versions) - Icom IC-M73 Instruction Manual

■ Automatic recording function (Depending on versions)

When this function is turned ON, the transceiver automati-
cally records the received signal into the memory.
The maximum recording time is 60 seconds.
• The transmit signal cannot be recorded.
• If a signal less than 60 seconds is recorded, the next recorded sig-
nal is added into the same data.
• The recording threshold level can be set in the set mode. See page
30 for details.
NOTE: Even if you turn OFF the transceiver, this function remains
ON.
• Example— Automatic recording
[Less than 60 seconds]
Starts recording Stops recording
Example: 40 seconds
[More than 60 seconds]
Starts recording
60 seconds
These contents
After 60 seconds has passed from
won't be recorded.
starting the automatic recording,
this function records the 60 seconds
before stopping to record.
When receiving a signal for 60
seconds or less, this function
records all contents.
Stops recording
FUNCTION MODE OPERATION
Push [F] to enter the function
q
mode, and then push [Y]/[Z] to
select the automatic recording
function.
• "A-REC" appears.
w Push [H/L•LOCK] to turn the
function ON or OFF.
• The automatic recording icon ap-
pears when the function is turned
ON.
• After pushing [H/L•LOCK], exits the
function mode.
e When a signal is received, the
transceiver automatically starts
recording.
• "REC" appears while recording.
• The recording will automatically stop
when the received signal disap-
pears, or the received signal strength becomes weaker than the
set threshold level in the set mode
(p. 30).
7
1
2
3
4
5
6
Automatic recording
mode appears.
7
8
Automatic recording
icon appears.
9
10
11
12
"REC" is appeared
while recording.
13
14
15
16
19