Technical Data - Husqvarna 324L Operator's Manual

Technical data

Engine
Cylinder displacement, cu.in/cm
Cylinder bore, inch/mm
Stroke, inch/mm
Idle speed, rpm
Recommended max. fast idle speed, rpm
Speed of output shaft, rpm
Max. engine output, acc. to ISO 8893, kW/ rpm
Catalytic converter muffler
Speed-regulated ignition system
Ignition system
Manufacturer/type of ignition system
Spark plug
Electrode gap, inch/mm
Fuel and lubrication system
Manufacturer/type of carburetor
Fuel tank capacity, US pint/litre
Weight
Weight without fuel, cutting attachment and guard, Lbs/kg
Sound levels
(see note 1)
Equivalent sound pressure level at the user's ear, measured according to
ANSI B175.3-1997, dB(A), min/max:
Vibration levels
Vibration levels at handles, measured according to ANSI B175.3-1997, m/s
At idle, left/right handles, min.:
At idle, left/right handles, max.:
At max. speed, left/right handles, min.:
At max. speed, left/right handles, max.:
Note 1: Equivalent noise pressure level is calculated as the time-weighted energy total for noise pressure levels under various
working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.
NOTE! Noise pressure at the user's ear and vibration on the handles are measured with all the machine's approved cutting
equipment fitted. The table indicates the highest and lowest values.
20 –
English
TECHNICAL DATA
3
324Lx 324LDx
1,53/25,0 1,53/25,0
1,38/35 1,38/35
1,03/26 1,03/26
3100 3100
11000 11000
8300 8300
0,8 / 7000 0,8 / 7000
No No
No No
Ikeda Ikeda
NGK CMR5H NGK CMR5H
0,024/0,6 0,024/0,6
Walbro Walbro
1,06/0,5 1,06/0,5
11,2/5,1 11,9/5,4
90/97 90/97
2
1,9/1,8 1,7/1,6
2,2/1,9 2,2/1,7
5,8/5,5 3,2/4,5
6,1/5,7 5,4/5,6