Figure 64 shows an incorrect configuration of a single host with both iSCSI and
Fibre Channel connections.
Important: Do not cable the storage subsystem and host systems as shown in
Figure 64. A storage subsystem with the incorrect storage topology
might appear to be functional, but incorrect cabling can potentially have
unpredictable results.
Fibre
Channel
ports
Fibre
Channel
switch
Fibre
Channel
ports
iSCSI
ports
Figure 64. Example of an incorrect configuration: Single-host, iSCSI and Fibre Channel
Figure 65 on page 94 shows an example of a multiple-host, multiple-port,
multiple-switch configuration.
Host with two single-port iSCSI
HBAs and one dual-port Fibre
Channel HBA
Controller A
Controller B
DS5020
Chapter 3. Cabling the storage subsystem
iSCSI
ports
Gigabit
Ethernet
switch
iSCSI
ports
Fibre
Channel
ports
93