Din Front-Mount - Boss Audio Systems BV7260B User Manual

INSTALLATION
WARNING!
Disconnect negative battery terminal from battery before start-
ing installation. Consult the vehicle's owner's manual for proper
instructions.
NOTE: Mark the polarity of the existing speaker wires before discon-
necting battery.
NOTE: Remove the two transport screws from the top of the unit
before installing.
DIN Front Mount
1. After removing the old radio
and mounting sleeve, insert sup-
plied mounting sleeve into open-
ing.
3. Attach wires from the unit to
existing wires. See wiring con-
nections diagram. Insert radio
into dashboard. Then apply the
trim frame to outside of radio.
2. Bend the tabs on the mount-
ing sleeve to keep the mount-
ing sleeve firmly in place.
4. Support radio using rear mounting
bolt and steel bar. (not included)