Dyna-Glo DGP350SNP User's Manual And Operating Instructions page 15

11. Place cooking grates (15) on the grill body braces
and grill rear panel, then insert the warming rack (16)
into the 2 holes located on the back edge of the grill
body (9).
12. With the left side table (17) in a perpendicular posi-
tion, align the slots in the left side table (17) with the
side table supports (12 and 13) and insert. To lock the
left side table (17) in the upright position, swing the left
side table (17) 90 degrees up, push towards the grill
body (9), and press down on the left side table (17) near
the grill body until it is fully fastened in place. Repeat
with the right side table (18).
11
12
17
13
16
9
12
13
15