Dyna-Glo DGP350SNP User's Manual And Operating Instructions page 13

7. Slip control knobs (11) onto the valve stems located
7
on the front control panel of the grill body (9).
9
11
9
8. Carefully place the
8
9
grill body (9) over the
mounting tabs on the
cart side panels (5 and
6
6) and onto the cart.
Adjust the grill body (9)
so that the holes in the
grill body (9) are
aligned with the holes
in the tabs of the cart
C
5
side panels (5 and 6.
NOTE: Make sure the
Hardware Used
gas hose is inside the cart. Fasten the grill
body (9) using 2 screws (C) on each side.
C
x4
M6 x 20 Screw
11