Assembly Instructions; Hardware Used - Dyna-Glo DGP350SNP User's Manual And Operating Instructions

1. Locate the two locking casters (2) and the two non-
locking casters (3). Secure the two locking casters (2)
to the rear (area of bottom shelf with cut away) of the
bottom shelf (1) using four screws (A) inserted
through four spring washers (E), then through four
plain washers (F) and into the threaded holes on the
bottom shelf (1). Secure the two non-locking casters
(3) to the front of the bottom shelf (A) using four
screws (A) inserted through four spring washers (E),
then through four plain washers (F) and into the
threaded holes on the bottom shelf (A). Tighten all
screws.

Hardware Used

A
M6 x 12 Screw
Spring
E
Washer
Plain
F
Washer
2. Secure the tank seat (4) to the bottom shelf (1)
with three screws (A).
Hardware Used
A
M6 x 12 Screw
1
x16
x16
x16
2
x3
8
3
A
E
F
2
4
A
1
1