Back Panel Switches (Fm4602 And Fm4603 Models Only) - AMT Datasouth Fastmark 4000 Series User Manual

Back Panel Switches (FM4602 and FM4603 models only)

Back Panel Switches are only available on FM4602 and FM4603.
Any change in switch position is not registered until Power is cycled.
Standard Switch Settings
Switch
Number
1
2
3
4
5
46 User's Guide
Function Position
setting
Thermal ON
Transfer
Ribbon
OFF
Euro Mark ON
OFF
Cutter ON
OFF
Gap Size ON
OFF
ON
OFF
Description
Ribbon is installed. Thermal transfer mode. Enables
end-of-ribbon detection. If end-of-ribbon occurs the
RIBBON and READY indicators will blink.
Ribbon is not installed. Direct thermal.
PPLA: Alternate (printable) control code set.
PPLB: Euro dollar symbol is used to replace the
character '_'.
PPLA: Standard control set.
PPLB: No Euro symbol.
Cutter is installed.
Cutter is not installed.
The gap length is more than 4 mm.
Media with normal gap or continuous media.
Peeler is installed.
Peeler is not installed.