JVC XV-N50BK Service Manual page 12

Hide thumbs Also See for XV-N50BK:

Table of Contents

XV-N50BK,XV-N55SL

2.2.2 Removing the traverse mechanism assembly (See Figure 7)

Reverse the loading mechanism assembly. Remove the four

screws B attaching the traverse mechanism assembly. Remove

the traverse mechanism assembly upward.

2.2.3 Removing the elevator (See Figure 8 and Figure 9)

• Prior to the following procedure, remove the traverse mecha-

nism assembly.

(1) Remove the two arms of the elevator from the two parts f

by moving the arms in a direction of the arrow.

(2) Pull out the elevator in a rear direction.

Attaching the elevator:

Engage the two holes g to the two shafts on the front part of

the elevator. And then, attach the elevator.

1-12 (No.A0041)

Loading mechanism

assembly

Traverse mechanism

assembly

Fig.7

Part f

Fig.8

Elevator

Shaft

Fig.9

Elevator

Part f

Slide cam

Table of Contents

Xv-n55sl