Menu #1 - Basic Features; System Features Menus - Viper 1002 Installation Manual

To select another menu:
1. Press and HOLD the Valet/Program button.
2. After three seconds, the unit will advance to the next menu and the siren will chirp, indicating
which menu has been accessed.
For instance, if you just programmed some features in Menu #1 (Basic Features) and you wish to
program a feature in Menu #2, you press and HOLD the Valet/Program button. After 3-seconds,
the siren chirps twice indicating access to Menu #2. To advance to Menu #3, continue to HOLD
the Valet/Program button an additional 3-seconds until the siren chirps three times indicating access
to Menu #3.
To exit the learn routine do one of the following:
➤ ➤
Close the open door.
➤ ➤
Turn the ignition on.
➤ ➤
No activity for longer than 15 seconds.
➤ ➤
Press the Valet/Program button too many times.

System Features Menus

Menu #1 - Basic Features

Items in bold text have been programmed to the default setting at the factory.
Feature One Chirp
Number Setting
1-1 Active arming
1-2 Chirps ON
1-3 Ignition controlled door locks ON
1-4 Ignition controlled door unlock ON
1-5 Active locking
1-6 Panic with ignition on
1-7* 0.8 second door lock pulses
1-8 Forced passive arming ON
1-9 Automatic Engine Disable ON
1-10 Vehicle Recovery System (VRS
1-11 Code Hopping
Note: For feature number 1-7, the 3.5 second door lock pulse setting the siren will chirp twice, the
0.4 second door lock pulse setting the siren will chirp three times.
24
) ON
®
® on
Two-Chirp
Setting
Passive arming
Chirps OFF
Ignition controlled door locks OFF
Ignition controlled door unlock OFF
Passive locking
No panic with ignition on
3.5 second door lock pulses/0.4 sec.
Forced passive arming OFF
Automatic Engine Disable OFF
(VRS ) OFF
®
Code Hopping ® off
© 2006
Directed Electronics, Inc.