Heat Controller A-VFH24TA-1 Installation, Operation & Maintenance Manual page 14

VFH InverterFlex - Outdoor Ductless Mini-Split
®
Part #
06654110
06654111
06654112
06654113
06654114
06654120
06554121*
*Note: This subassembly only comes with the A-VFH42PA-1 model.
IMPORTANT:
Due to the use of these subassemblies on the connections of the outdoor unit, please be
sure to accommodate for about 9" (220mm) of clearance from the side of the unit where the refrigerant
lines attach.
Subassemblies for A-VFH24TA-1, A-VFH30QA-1 Outdoor Units:
For models A-VFH24TA-1 and A-VFH30QA-1, two (2) subassemblies consisting of a straight piece of copper with a female
flare nut x male flare fitting, are provided to connect any indoor units that have 1/2" (12.7mm) gas connections with the
outdoor unit's 3/8" (9.52mm) gas connections.
Flare Nut Size ① Flare Fitting ②
1/4" (6.35mm) 3/8" (9.52mm)
1/2" (12.7mm) 3/8" (9.52mm)
1/2" (12.7mm) 5/8" (15.9mm)
3/8" (9.52mm) 1/4" (6.35mm)
5/8" (15.9mm) 3/8" (9.52mm)
5/8" (15.9mm) 1/2" (12.7mm)
3/8" (9.52mm) 1/2" (12.7mm)
L2
②
Flare Fitting w/Cap
Connects to Line Set
Unit Length
Top View
Length L1
3.11" (79mm)
4.45" (113mm)
4.45" (113mm)
4.37" (111mm)
6.92" (176mm)
6.92" (176mm)
4.37" (111mm)
L1
①
Flare Nut
Connects to Outdoor Unit
Additional Clearance
14
Heat Controller
Length L2
3.5" (88mm)
4.65" (118mm)
4.85" (123mm)
5.55" (141mm)
6.50" (165mm)
5.24" (133mm)
3.74" (95mm)
Required
≈ 9" (220mm)