Table of Contents
Advertisement
Handle notch
•
Must be far
enough down
the stick to allow
a comfortable and
firm grip.
•
Must be deep enough
to prevent hand from
slipping down the
stick.
•
Do not cut more than
halfway into the stick
to prevent weakening.
•
Corners may be
rounded to increase
comfort.
Stick Length
•
Must be long enough
to keep hand clear of
blade.
•
At least 6" from end of
handle to closest part
of notch.
•
Must be right (90°) angle, cut at 30°-40° from the angle of the
stick to keep hands out of the line of the blade.
•
The lower lip of the notch must be no longer than the workpiece
is thick.
SKU 97896
For technical questions, please call 1-800-444-3353.
Essential Straight Push-stick Features and
note: Straight style (traditional) stick shown. A
different stick design may be used if it properly
protects against all hazards.
•
Push sticks must be made from sturdy, defect-free,
notch
Functions
diagram not to scale.
plywood or normal wood to prevent unexpected
breakage. Material must be at least 1/4" thick, but
no thicker than the finished wood.
•
Inspect push stick before use and do not use a
damaged or deteriorated push stick.
•
Push stick dimensions will vary depending
on the application and user.
90°
30°-40°
Page 7
Hide quick links:
Advertisement
Table of Contents
