Special Features; Auto Changeover; Smart Recovery - Bryant Legacy Owner's Manual

Special Features

The thermostat displays one of five modes: heat, cool, Em heat
(heat pump version only), heat cool, and off. When the mode selection
is for both heating and cooling, the thermostat is in auto changeover
mode. This allows the system to switch from heating to cooling – or
from cooling to heating – to maintain the temperatures you've
programmed. It does this automatically.

Smart Recovery

The Smart Recovery feature transitions your home from one temperature
period (P1, P2, P3, P4) to the next so that the your home's temperature
matches the temperature setting at the start of each time period. This
means, for example, that if your sleep period temperature setting is
lower than the period that precedes it, the thermostat will start cooling
down the home before the beginning of the scheduled sleep period.
It does this at an energy-efficient rate. This not only helps make your
home as comfortable as possible, it also makes your thermostat more
cost effective. Call your dealer to adjust Smart Recovery settings.
47