Bryant Legacy Owner's Manual page 26

Programming the Thermostat
on the screen. Press the up or down button and stop on the
desired time.
17. If you did not select all days when you started this process,
repeat all the steps for your remaining timeframe choice –
weekdays or weekends.
18. To confirm that the thermostat has accepted your changes, cycle
through the four time periods by pressing days, selecting your time
frame – all days, weekdays, or weekends – and then pressing the
period button to see the hours assigned for each start time. Each
time you press period, you will advance to the next start time.
19. Close the door.
25