Keypad Lock; Turn The Handset Ringer On Or Off; Finding Handset (Paging) - BT 4000 Quick Setup And User Manual

To lock the keypad
1. Press and hold
a confirmation tone and
displayed before returning to the idle screen with
the icon displayed.
To unlock the keypad
1. Press and hold
a confirmation tone and
displayed before returning to idle.

Turn the handset ringer on or off

1. Press and hold
handset ringer on or off. The display will briefly
show
Ringer on or off
screen with the
been turned off.
Find handset (Paging)
You can ring a handset to help find it.
1. Press on the base. All handsets registered to
the base will ring and the screen will show
for up to 2 minutes.
am!
2. To stop the ringing, press
select End or press
If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
1662 BT4000 UG [3].indd 25
for 2 seconds. The handset gives
Keypad locked
for 2 seconds. The handset gives
Keypad Unlockd
for 2 seconds to turn the
before reverting to the idle
icon displayed if the ringer has
on the base again or
on any handset.
You can lock the keypad so that
it can't be used accidentally
while you're carrying it around.
is briefly
With the keypad locked, you
can still call the emergency
services on 999 and 112 using
preparatory dialling and you
can still answer incoming calls
and operate the in call features
as normal. When the call is
is briefly
ended, the
If you get an incoming call
while you're paging a handset,
the incoming call takes priority
and paging will stop.
If the handset ringer is switched
off on a handset, it will be
temporarily switched back on so
Here I
the handset can be found.
Paging calls can't be answered
by a handset.
Using the phone 25
comes on again.
09/04/2013 15:03