Dynamic Ip Address (Dhcp) - D-Link GO-RT-N150 User Manual

Section 3 - Configuration
My Internet Select Dynamic IP (DHCP) to obtain IP Address
Connection:
information automatically from your ISP. Select this
option if your ISP did not provide you with any IP
numbers to use. This option is commonly used for
cable modem services.
Host Name:
The Host Name is optional but may be required
by some ISPs.
DNS
Enter the Primary DNS server IP address assigned
Addresses:
by your ISP.
MTU:
Maximum Transmission Unit - you may need to
change the MTU for optimal performance with
your specific ISP. 1500 is the default MTU.
MAC
The default MAC Address is set to the Internet
Address:
port's physical interface MAC address on the
router. It is not recommended that you change the
default MAC address unless required by your ISP.
You can use the Clone Your PC's MAC Address
button to replace the Internet port's MAC address
with the MAC address of your Ethernet card.
D-Link GO-RT-N150 User Manual

Dynamic IP Address (DHCP)

16