Port Forwarding - D-Link GO-RT-N150 User Manual

Section 3 - Configuration
This will allow you to open a single port or a range of ports.
Name:
Enter a name for the rule or select an application
from the drop-down menu. Select an application
and click << to populate the fields.
IP Address:
Enter the IP address of the computer on your local
network that you want to allow the incoming
service to. If your computer is receiving an IP
address automatically from the router (DHCP) then
it will be listed in the "Computer Name" drop-down
menu. Select your computer and click <<.
TCP/UDP:
Enter the TCP and/or UDP port or ports that you
want to open. You can enter a single port or a range
of ports. Separate ports with a comma.
Example: 24,1009,3000-4000
D-Link GO-RT-N150 User Manual

Port Forwarding

28