Dynamic Ip Address (Dhcp) - D-Link GO-RT-N150 User Manual

Section 3 - Configuration
My Internet
Select Dynamic IP (DHCP) to obtain IP Address information
Connection:
automatically from your ISP. Select this option if your ISP does
not give you any IP numbers to use. This option is commonly
used for Cable modem services.
Host Name:
The Host Name is optional but may be required by some ISPs.
DNS
Enter the Primary DNS server IP address assigned by your ISP.
Addresses:
MTU:
Maximum Transmission Unit - you may need to change the
MTU for optimal performance with your specific ISP. 1500 is
the default MTU.
MAC
The default MAC Address is set to the Internet port's physical
Address:
interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless
required by your ISP. You can use the Clone Your PC's MAC Address button to replace the Internet port's MAC address
with the MAC address of your Ethernet card.
D-Link GO-RT-N150 User Manual

Dynamic IP Address (DHCP)

16