Front Panel Control - Planar PX2210MV User Manual

FRONT PANEL CONTROL

x Power Button:
Press this button to switch ON/OFF monitor's power.
x Power Indicator :
Blue --- Power On mode.
Orange --- Off mode.
x
MENU/ENTER:
Activates OSD menu or function adjust confirm .
x
ECO/(-)
Activates the ECO control when the OSD is OFF or navigate through adjustment icons
when OSD is ON or adjust a function when function is activated.
x Volume/+:
Activates the volume control when the OSD is OFF or navigate through adjustment
icons when OSD is ON or adjust a function when function is activated.
x Source/Auto Adjust/Exit:
When the OSD is OFF, pressing Auto/Source button will toggle between sources.
Press continuously to select the input source indicated in the message bar.Press
Menu/Enter button to change to the selected source.
Auto configure hot key:(VGA input only) When the OSD is OFF,press and hold down
the button for 2 seconds to auto configure.
when OSD menu is ON, this button will act as a Exit Key (Exit OSD menu)
OSD Lock Function: To lock the OSD, press and hold the MENU button while the
monitor is off and then press power button to turn the monitor on. To un-lock the
OSD - press and hold the MENU button while the monitor is off and then press
power button to turn the monitor on.
NOTES
x
Do not install the monitor in a location near heat sources such as radiators or air
ducts, or in a place subject to direct sunlight, or excessive dust or mechanical
vibration or shock.
x
Save the original shipping carton and packing materials, as they will come in
handy if you ever have to ship your monitor.
x
For maximum protection, repackage your monitor as it was originally packed at
the factory.
x
To keep the monitor looking new, periodically clean it with a soft cloth.
Stubborn stains may be removed with a cloth lightly dampened with a mild
detergent solution. Never use strong solvents such as thinner, benzene, or
abrasive cleaners, since these will damage the cabinet. As a safety precaution,
always unplug the monitor before cleaning it.
x
do not scratch the screen with hard things, It may cause permanent damage .
x
Don't leak liquid into monitor which will result in the damage of component
12