CANopY iNSTALLATioN
iNSTALLiNG CANopY
A canopy is furnished with each firebox and MUST be
installed for safe operation. Figure 11
The firebox canopy must not be modified
or replaced with a canopy that may be
provided with the unvented decorative
room heater.
1. Remove the three (3) screws from the top front frame
assembly. Also remove the two (2) screws on the side
frames. Figure 11
2. Align the canopy with the holes in the top frame.
3. Replace the screws previously removed.
4. Tighten side screws. Make sure the canopy is level and
secure.
Figure 11 -
Canopy Installation
26D4721
Hood
Screws
FP2695
install canopy
Close fireplace screen panel before
operating a decorative type unvented room
heater.
LCUF Vent Free Firebox
FP2695
11