Canopy And Radiant Face Plates Installation - MHSC BUF400 Installation And Operating Instructions Manual

INSTALLING CANOPY
A canopy is furnished with each firebox and MUST be installed for safe operation. See Figure 14.
1. Locate three (3) holes at the top of the front frame. See Figure 13.
2. Align the canopy with the holes in the top of the frame.
3. Secure canopy to front of frame with screws provided. See Figure 13.
Front
Frame
61D1013
The firebox canopy must not be
modified or replaced with a canopy
that may be provided with the unvented
decorative room heater.
Screws
Figure 13 - Installing Canopy
Close fireplace screen panel before
operating a decorative type unvented
room heater.
CANOPY INSTALLATION
Canopy
13