Table of Contents
Advertisement
CANOPY INSTALLATION
INSTALLING CANOPY
A canopy is furnished with each firebox and MUST be
installed for safe operation. Figure 19
The firebox canopy must not be modified
or replaced with a canopy that may be
provided with the unvented decorative
room heater.
1. Align the canopy with the holes in the top frame.
. Secure longer canopy with three (3) screws provided.
3 Repeat on opposite side for See-Through Unit (36STFL)
and Peninsula Unit (36PFL). Install the 0" (shorter)
canopy on the shorter end with two () screws (36RCFL/
36LCFL).
79D0007
Figure 19 -
Canopy Installation
FP2898
canopy install
Lo-Rider Vent Free Fireboxes
Close fireplace screen panel before
operating a decorative type unvented room
heater.
13
Advertisement
Table of Contents
