NewAir AC-14100 Owner's Manual page 7

 The unit has casters to aid placement, but it should only be rolled on smooth, flat surfaces. Use caution
when rolling on carpet surfaces. Do not attempt to roll the unit over objects.
 The unit must be placed within reach of a properly rated grounded socket.
 Never place any obstacles around the air inlet or outlet of the unit.
 Allow 12 inches to 40 inches of space from the wall to the window for efficient air conditioning.
WINDOW SLIDER KIT INSTALLATION
Your window slider kit has been designed to fit most standard "vertical" and "horizontal" window applications.
However, it may be necessary to improvise/modify some aspects of the installation procedures for certain
types of windows.
Note: If the window opening is less than the minimum length of the window slider kit, cut the piece with a
hole in it, so that it is the correct size to fit the window opening. Leave the hole in the window slider kit intact.
Never cut out the hole in the window slider kit.
1. Open the window and insert the window kit into the open gap.
2. Close the window until the window kit is held securely. You may need to expand the size of the window kit
using the included window spacers. This technique can also be used for sash windows.
3. Insert one end of the exhaust hose into the exhaust air outlet located on the back of the air conditioner.
Attach the exhaust hose adapter to the other end of the exhaust hose and connect the adapter to the
window kit.
Venting through a Wall
1. Cut a 6" (152 mm) diameter hole in the wall.
2. Insert one end of the exhaust hose into the exhaust air outlet located on the back of the air conditioner.
3. Insert the exhaust hose through the hole. On the other side of the wall, attach the round connector to the
exhaust hose.
When the air conditioner is not in use, cover the hole with the provided exhaust cap.
4.
POSITIONING THE EXHAUST HOSE
 Slide the hose adaptor over the opening on the back of the unit.
7
Count on Us