Raising The Mast - MULTIQUIP GBC Operation And Parts Manual

stoWing outrigger
1. Pull up the counterweight to unlock the outrigger and
pull up outrigger. See Figure 17.
PULL UP
OUTRIGGER
Figure 17. Stowing Outrigger
2. Push in outrigger until it is all the way in and pull down
counterweight to lock it in place. See Figure 18.
PUSH IN
OUTRIGGER
Figure 18. Locking Stowed Outrigger
gBC/gBCe lighting system • operation and parts manual — rev. #1 (03/25/14) — page 19
PULL UP
COUNTERWEIGHT
PUSH IN
OUTRIGGER

raising the mast

danger
ALWAYS make sure the area above
the lighting system is open and clear
of overhead power lines and other
obstructions. Contact with overhead
power lines or other obstructions could
result in equipment damage, electrical
shock, electrocution and even death.
Caution
When raising or lowering the mast, keep hands and
fingers clear of the mast sections to prevent hand and
fingers from getting pinched.
1. Raise the second mast to the desired height and tighten
the T-bolt securely. See Figure 19.
SECOND
Figure 19. Raising the Second Mast
2. To raise the mast higher, raise the third mast until the
lock/release tab pops out. The tab will automatically
rest on the second mast. See Figure 20.
THIRD
MAST
Figure 20. Raising the Third Mast
operation
MAST
T-BOLT
LOCK/
RELEASE
TAB