Page 1
OperatiOn and parts Manual GlOBuG series MOdel GBC/GBCe Cart type liGhtinG systeM Revision #1 (03/25/14) To find the latest revision of this publication, visit our website at: www.multiquip.com THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
Specifications and part numbers are subject to change Wiring Diagram ............28 without notice. Explanation Of Code In Remarks Column..... 30 Suggested Spare Parts ......... 31 gBC/gBCe lighting system • operation and parts manual — rev. #1 (03/25/14) — page 3...
All orders are treated as Standard Orders and will ship the same day if received prior to 3PM PST. We aCCept all maJor Credit Cards! page 4 — gBC/gBCe lighting system • operation and parts manual — rev. #1 (03/25/14)
Could result in death or serious inJury. Caution Indicates a hazardous situation which, if not avoided, Could result in minor or moderate inJury. NOTICE Addresses practices not related to personal injury. gBC/gBCe lighting system • operation and parts manual — rev. #1 (03/25/14) — page 5...
This information will be invaluable in the case of an do not use the equipment for any purpose other than emergency. its intended purposes or applications. page 6 — gBC/gBCe lighting system • operation and parts manual — rev. #1 (03/25/14)
Page 7
ALWAYS have a trained technician to install and remove lamp or replace any damaged fi xture wiring. gBC/gBCe lighting system • operation and parts manual — rev. #1 (03/25/14) — page 7...
Page 8
NOTICE ALWAYS make certain that proper power or extension cord has been selected for the job. See Cable Selection Chart in this manual. page 8 — gBC/gBCe lighting system • operation and parts manual — rev. #1 (03/25/14)
ARROWS (4 PLACES) Never allow any person or animal to stand underneath the equipment while lifting. DO NOT lift machine to unnecessary heights. GBC/GBCE LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #1 (03/25/14) — PAGE 9...
27.6 x 40 x 47.7 in Storage (700 x 1,023 x 1,212 mm) GBC -126 lb (57.2 kg) Weight GBCE - 130.7 lb (59.3 kg) Appropriate Generator 1700 Watts page 10 — gBC/gBCe lighting system • operation and parts manual — rev. #1 (03/25/14)
Components GBCE ONLY Figure 3. GBC/GBCE Components page 14 — gBC/gBCe lighting system • operation and parts manual — rev. #1 (03/25/14)
Page 15
25. lamp guard — Protects the lamp from being hit by objects and balloon material from touching lamp. 26. extension pole (gBCe only) — Extends mast height by 40 inches. gBC/gBCe lighting system • operation and parts manual — rev. #1 (03/25/14) — page 15...
4. For the GBCE, attach the extension pole to the top of ZIPPER the mast as shown in Figure 6. EXTENSION BALLOON POLE FULLY EXPOSED BOLT Figure 9. Folding Balloon Cover Figure 6. Extension Pole Attachment page 16 — gBC/gBCe lighting system • operation and parts manual — rev. #1 (03/25/14)
Page 17
Figure 11. Securing Cable with Hook 11. Release the buckle on the belt holding the balloon together. See Figure 12. BUCKLE Figure 12. Releasing Buckle gBC/gBCe lighting system • operation and parts manual — rev. #1 (03/25/14) — page 17...
The tab will automatically Figure 18. Locking Stowed Outrigger rest on the second mast. See Figure 20. THIRD MAST LOCK/ RELEASE Figure 20. Raising the Third Mast gBC/gBCe lighting system • operation and parts manual — rev. #1 (03/25/14) — page 19...
Page 20
2. Start the generator as indicated in the generator manual. The balloon will start to inflate and the lamp will turn on. Figure 25. Turning Off Lamp Only page 20 — gBC/gBCe lighting system • operation and parts manual — rev. #1 (03/25/14)
8. Release the lever on the mast holder and pull out the mast. 9. Stow the three outriggers as detailed in the STOWING OUTRIGGER section. gBC/gBCe lighting system • operation and parts manual — rev. #1 (03/25/14) — page 21...
2. Release the lamp guard locking tabs. See Figure 27. LAMP LAMP SOCKET LAMP GUARD Figure 30. Installing New Lamp LOCK TAB Figure 27. Removing Lamp Guard page 22 — gBC/gBCe lighting system • operation and parts manual — rev. #1 (03/25/14)
Page 23
2. Slide out the old or worn balloon over the top of the lamp guard assembly. See Figure 32. Figure 34. Zipping Up New Balloon REMOVE OLD BALLOON Figure 32. Removing Old Balloon gBC/gBCe lighting system • operation and parts manual — rev. #1 (03/25/14) — page 23...
Page 24
3. Turn the three locking tabs outwards to release the air plate. See Figure 35. 4. Remove the air plate and filter. See Figure 36. AIR PLATE FILTER Figure 36. Filter Removal page 24 — gBC/gBCe lighting system • operation and parts manual — rev. #1 (03/25/14)
Page 25
Is fan motor (blower) not working Check and repair fan motor (blower). properly? Balloon does not inflate. Is balloon envelope defective? Repair or replace balloon envelope. gBC/gBCe lighting system • operation and parts manual — rev. #1 (03/25/14) — page 25...
Page 26
Figure 38. Maintenance Check Points page 26 — gBC/gBCe lighting system • operation and parts manual — rev. #1 (03/25/14)
Page 27
Replace. • Electric Plug Damaged? Replace. • — Check daily # — Every 20 hours $ — Every 100 hours & — Every 500 hours gBC/gBCe lighting system • operation and parts manual — rev. #1 (03/25/14) — page 27...
ELECTRONIC BLACK BALLAST WHITE BLACK GRN/YEL CONNECTOR BLK 1 BLK 2 (FEMALE) FRONT VIEW CONNECTOR (MALE) TABLE 3 REFERENCE DESIGNATIONS BLACK WHITE BLACK GRN/YEL MOTOR page 28 — gBC/gBCe lighting system • operation and parts manual — rev. #1 (03/25/14)
Page 29
• operation and parts manual — rev. #1 (03/25/14) — page 29...
“Remarks” Column. assembly/kit that can be purchased, or is not available for sale through Multiquip. page 30 — gBC/gBCe lighting system • operation and parts manual — rev. #1 (03/25/14)
2....GBB115DR ...BALLOON CLOTH CP 3....2214500430 ..FILTER NOTICE Part numbers on this Suggested Spare Parts list may supersede/replace the part numbers shown in the following parts lists. gBC/gBCe lighting system • operation and parts manual — rev. #1 (03/25/14) — page 31...
Lamp OFF Push the button in the hole with a small switch flat-blade screwdriver (or similar tool) for 3 seconds. LED will turn green. A-4001940-00 page 32 — gBC/gBCe lighting system • operation and parts manual — rev. #1 (03/25/14)
Page 33
DECAL; ELECTRIC SHOCK, HIGH VOLTAGE, BURN HAZ..1 ..DCL1261 A400193600 DECAL; WARNING, OUTRIGGER DEPLOYMENT A400193300 DECAL; GLOBUG LIGHTING SYSTEM NAMEPLATE ................1 ..CONTACT MQ PARTS DEPT. gBC/gBCe lighting system • operation and parts manual — rev. #1 (03/25/14) — page 33...
“Remarks” Column. assembly/kit that can be purchased, or is not available for sale through Multiquip. page 42 — gBC/gBCe lighting system • operation and parts manual — rev. #1 (03/25/14)
Page 43
• operation and parts manual — rev. #1 (03/25/14) — page 43...