How To Set Extended Parameters - Toshiba TOSVERT VF-S11 Instruction Manual

4.2.2
The VF-S11 has extended parameters to allow you to make full use of its functions.
All extended parameters are expressed with  and three digits.
Basic parameters
4
Press the MODE key once and use the
to select  from the basic parameters.
[Steps in key entry for extended parameters]

How to set extended parameters


: switches to the setting monitor mode.(Displays )
MODE
: Selects "" from basic parameters.
: The first extended parameter "" (Low-speed signal output frequency) is displayed.
: Selects the extended parameter whose setting needs to be changed.
: Reads the programmed parameter setting.
: Changes the parameter setting.
Saves the changed value of the extended parameter setting.
Pressing the
MODE
ENT
MODE
key
key instead of the key moves back to the previous status.
34
E6581160
～
Press the key or the key to
change the set value. Pressing
the ENTER key allows the reading
of parameter setting.
* See 7.3 for extended
parameters.