Measures - Toshiba TOSVERT VF-S11 Instruction Manual

Industrial inverter (for 3-phase induction motors)
Hide thumbs Also See for TOSVERT VF-S11:
Table of Contents

Advertisement

Operations
• Do not touch inverter terminals when electrical power is going to the inverter even if the motor is
stopped.
Touching the inverter terminals while power is connected to it may result in electric shock.
• Do not touch switches when the hands are wet and do not try to clean the inverter with a damp cloth.
Such practices may result in electric shock.
Prohibited
• Do not go near the motor in alarm-stop status when the retry function is selected.
The motor may suddenly restart and that could result in injury.
Take measures for safety, e.g. attaching a cover to the motor, against accidents when the motor
unexpectedly restarts.
• Turn input power on after attaching the front cover.
When installed inside a cabinet and using with the front cover removed, always close the cabinet doors
first and then turn power on. If the power is turned on with the front cover or the cabinet doors open, it
may result in electric shock.
Instruction
• Make sure that operation signals are off before resetting the inverter after malfunction.
If the inverter is reset before turning off the operating signal, the motor may restart suddenly causing
injury.
• Observe all permissible operating ranges of motors and mechanical equipment. (Refer to the motor's
instruction manual.)
Not observing these ranges may result in injury.
Prohibited
Warning
Caution
5
E6581160
I

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents