Inserting Batteries In The Remote Control; Switching On For The First Time; Powering On And Checking Picture - Topfield TF 7700 HCCI User Manual

High definition digital cable receiver extensible to personal video recorder

Hide thumbs Also See for TF 7700 HCCI:

Table of Contents

14 Setup

2.5 Inserting batteries in the remote control

2.6 Switching on for the ﬁrst time

To insert the batteries, open the battery compartment by remov-

ing the lid, and then insert the batteries observing the polarity,

which is marked on the base of the battery compartment.

If the digital receiver no longer reacts properly to remote con-

trol commands, the batteries may be ﬂat. Be sure to remove

used batteries. The manufacturer accepts no liability for the

damage resulting from leaking batteries.

NOTE

Batteries, including those which contain no heavy metals, may

not be disposed with other household wastes. Please dispose

of used batteries in an environmentally sound manner. Find

out the legal regulations which apply in your area.

Now that you have your digital receiver connected, you should

plug it into a mains socket. Ensure that your television set is

turned on, so that you will be able to see the display from the

digital receiver.

Now, press the

trol. After about 10 seconds you may see a picture displaying

a menu. If you do not see a picture, try pressing the

You need to obtain a SCART cable to use the

auxiliary SCART connector. Plug one end of

the cable into the VCR socket on the digital re-

ceiver, and plug the other end into the match-

ing socket on your video cassette recorder or

suchlike.

button in top left corner on the remote con-

V.Format

Table of Contents