Home Area Code; Dial Mode; Website - VTech CS6124-11 User Manual

Telephone settings

Home area code

If you dial local calls using only seven digits (area code not required), you can
program your home area code so that when you receive a call within your local
area, the telephone number is automatically stored in the call log without the
area code.
To change the setting:
1. Press MENU/
CID or
2. Press
then press
MENU
CID or
3. Press
Home area code, then press
screen displays the current stored home area code.
4. Use the dialing keys (0-9) to enter the desired home
area code.
• Press
MUTE
• Press and hold
/SELECT to confirm. You hear a confirmation tone.
5. Press
MENU
If, in the future, your telephone service provider requires you to dial the area code
when making a local call, or, if you move to a location that requires it, delete the
home area code you have already programmed following the steps above. After
you have deleted the home area code, _ _ _ appears.

Dial mode

The default dial mode is tone dialing. If you have pulse (rotary) service, you
need to change the dial mode to pulse dialing.
To change the setting:
Press MENU/
1.
CID or
2. Press
/SELECT.
MENU
CID or
3. Press
/SELECT.
MENU
CID or
4. Press
confirm your selection. You hear a confirmation tone.

Website

Use this feature to view the VTech website address.
Press MENU/
1.
2. Press CID or
/SELECT. The screen displays the VTech website address.
MENU
when the handset is not in use.
SELECT
until the screen displays Settings,
/SELECT.
until the screen displays
/DELETE to delete a digit.
/DELETE to delete all digits.
MUTE
when the handset is not in use.
SELECT
until the screen displays Settings, then press
until the screen displays Dial mode, then press
to choose Tone or Pulse, then press
when the handset is not in use.
SELECT
until the screen displays Website, then press
/SELECT. The
MENU
10
Home area code
Home area code
___
/SELECT to
MENU