Creating A Mykey; Clearing All Mykeys - Lincoln MKZ HYBRID 2015 Owner's Manual

Hide thumbs Also See for MKZ HYBRID 2015:
Table of Contents

Advertisement

Audio system maximum volume of 45%.
A message will be shown in the display
when you attempt to exceed the limited
volume. Also, the speed-sensitive or
compensated automatic volume control
will be disabled.
Always on setting. When this is selected,
you will not be able to turn off Advance
Trac (if your vehicle is equipped with this
feature).

CREATING A MYKEY

Use the information display to create a
MyKey:
1. Insert the key you want to program into the
ignition. If your vehicle is equipped with a
push-button start, place the intelligent access
key fob into the backup slot. The location of
your backup slot is in another chapter. See
Starting and Stopping the Engine (page 163).
2. Switch the ignition on.
MKZ Hybrid (), enUSA
MyKey
3. Access the main menu on the information
display controls, and select Settings then
MyKey by pressing OK or the > button.
4. Press OK or the > button to select Create
MyKey.
5. When prompted, hold the OK button until
you see a message informing you to label
this key as a MyKey. The key will be
restricted at the next start.
MyKey is successfully created. Make sure
you label it so you can distinguish it from the
admin keys.
You can also program configurable settings
for the key(s). See Programming/Changing
Configurable Settings.
Programming/Changing Configurable
Settings
Use the information display to access your
configurable MyKey settings.
60
1. Switch the ignition on using an admin key
or fob.
2. Access the main menu on the information
display controls, and select Settings,
then MyKey by pressing OK or > button.
3. Use the arrow buttons to get to a feature.
4. Press OK or > to make a selection.
Note: You can clear or change your MyKey
settings at any time during the same key
cycle as you created the MyKey. Once you
have switched the vehicle off, however, you
will need an admin key to change or clear
your MyKey settings.

CLEARING ALL MYKEYS

You can clear or change your MyKey settings
using the information display control on the
steering wheel. See Information Displays
(page 109).
Switch the ignition on using an admin key or
fob.

Advertisement

Table of Contents
loading

This manual is also suitable for:

2013 mkz

Table of Contents