Ford TRANSIT 2015 Owner's Manual page 306

Voice command
(phone | Blackberry |
iPhone | Mobile)
Services
SYNC
(USB [stick] | iPod | MP3
[player])
vehicle [health] report
voice settings
[main menu] help
You can say any of the voice commands that appear within open and close brackets that
are separated by |. For example, where (cancel | stop | exit) appears you say; cancel or
stop or exit.
You must say any of the voice commands that appear outside of open and close brackets.
For example, where mobile (apps | applications) appears, you must say mobile followed
by either apps or applications.
You do not need to say words that appear within square brackets. For example, for where
(USB [stick] | iPOD | MP3 [player]) appears, you can say USB or USB stick.
Note: Mobile Applications, Services and Vehicle health report, is only available in the United
States of America.
System Interaction and Feedback
The system provides feedback through
audible tones, prompts, questions and
spoken confirmations depending on the
situation and the chosen level of
interaction (voice settings). You can
customize the voice recognition system to
provide more or less instruction and
feedback.
The default setting is to a higher level of
interaction in order to help you learn to use
the system. You can change these settings
at any time.
Transit (TTH) Canada/United States of America, enUSA, Edition date: 03/2014
SYNC
If you want the system to carry out the following
Make calls.
Access the SYNC Services portal.
Return to the main menu.
Access the device connected to your USB port.
Run a vehicle health report.
Adjust the level of voice interaction and feedback.
Hear a list of voice commands available in the current mode.
Adjusting the Interaction Level
E142599
Voice Control (page 62).
A tone sounds and the following
message appears in the information
display.
303
Initiate a voice session by
pressing the voice button on the
steering wheel controls. See
Message
Listen